Send Us an Email CONTACT US
Give Us A Call 9409 9948

Sportcoat Premix Patching

sportcoat-premix-patching

Scope
This document sets out the description of and information regarding pre-mixed patching compound which is a sandy acrylic bound paste designed to be used to fill cracks and other surface imperfections on sporting surfaces.

Material Description
The product is a moist lightly bound paste of pigmented acrylic resin, and other mineral ingredients which is designed to have minimum shrinking characteristics on drying and to display a degree of flexibility to withstand some movement in the repair that has been made. It is rapid drying and can be sanded within a few hours.

Purpose
The purpose of the material is to fill gouges in surface of tennis courts, repair cracks and generally to make good any minor defects e.g. normal maintenance to repair racquet gouges, or following the installation of lights, new tennis net posts etc. where the court surface may be damaged. The material may be used as a final repair, although it may need periodic replacement until the next re-surfacing of the area.

Application
The surface to which the material is to be applied shall be entirely free from dust, dirt, grease or other deleterious matter. Prior to filling surface cracks any grass, moss or other growth in the cracks must be removed entirely and root system destroyed. The cracks should be either blown out by compressed air or washed out by high pressure means. Gouges on the surface of the courts should be brushed out with either a wire brush or similar to ensure that no loose material remains in the base of the gouges. For surface repairs to newly installed pavement, it is also essential that any loose material is removed prior to the application of the crack filler. The material should be thoroughly pressed into place using a broad knife, filling blade or similar implement to leave the surface of the filler smooth and flush with the surrounding area. The material may be used to fill deep indentations, but should be installed in layers, to ensure that thorough drying is permitted. The surface of the filled area should be lightly brushed with a dry brush or cloth before the filler has dried, to improve the aesthetics and camouflage the repair. Any areas treated with crack filler should be allowed to through dry up to 24 hours before over coating with Sportcoat surface coats.

Caution
Clean all tools immediately after with water. The dried material is very difficult to remove later. Keep all containers of material tightly closed and in a cool place when not in use. When in use ensure that the material is kept damp, i.e. replace lid or cover with a cloth to avoid drying out. The product cannot be successfully re-wetted after drying out although it is possible to add more water to fresh material if not sufficiently moist. Do not take internally. Keep out of reach of children.

Packaging
The material is packed in 500ml 1lt 2lt 4lt drums.