Send Us an Email CONTACT US
Give Us A Call 9409 9948

Tennis Court Fencing

Framework

Posts
(Capped):
End – 50 nominal bore galvanized pipe set in 760mm
deep x 228mm.dia.
concrete bases
Corner – 50 nominal bore galvanized pipe
Gate -40 nominal bore galvanized pipe
Intermediate – 40 nominal bore galvanized pipe Set in 600mm
deep x 228mm.dia.
concrete bases
Intermediate Posts at 3050mm – 45570mm centres.
Stays: End, corner & gate posts – 40 nominal bore galvanized pipe set in concrete bases.

Fabric

Chain Link Mesh: Stays and posts secured with clamp-on fittings.
3050mm or 3660mm x 45mm x 2.50mm.
Galvanized or P.V.C. steelwire securely and neatly strained to corner and end posts, and fastened to cables with 2.00mm wire ties. Also available 50 or 40mm mesh but this is generally not suitable for tennis.

Auxiliary

Cable Wire To support Chain Link Mesh, 2 twisted 3.15mm galvanized or P.V.C. wires fixed to each post evenly at four points down each post, as approved by the Australian Standard 1725-1975.
Lacing and Tie Wire: 2.00mm galvanized or P.V.C. wire.

Gates

Frames of 20mm nominal bore galvanized pipe and covered with Chain Link fabric to match fencing.

RAIL-LESS TENNIS COURT FENCEfence

Options: Top rail and bottom cable
Top and bottom rails
PVC or Heavy Galv. Chainwire
45mm Aperture Chainwire.